MAXinBOX 8 v4 | Multifunctional actuator, 8 outputs (16 AC-Load) Secure
€250,27 Incl. tax €336,38 Incl. tax. Out of stock, but available
Specifications
Information
Zennio MAXinBOX 8 v4 - Multifunctional Actuator (Art.nr.: ZIOMB8V4)
The Zennio MAXinBOX 8 v4 is an advanced multifunctional actuator designed for KNX systems. This actuator offers 8 outputs (16A C-Load) and supports a variety of configurations, including blinds and shutter control, individual channels, and 2-pipe fan coil control. KNX Secure compatibility ensures enhanced security.
Main Features
- 8 potential-free outputs, suitable for 16A C-Load
- Supports blind/shutter channels (up to 4), individual channels (up to 8), and 2-pipe fan coil control (up to 2)
- Maximum inrush current: 800 A/200 μs, 165 A/20 ms
- Manual operation with buttons and LED status indicators
- 20 independent logical functions
- Compatible with KNX Data Secure
- Data saving in case of KNX bus failure
- Timing settings for output configurations
Technical Specifications
| Device Type | Electrical operation control device |
|---|---|
| KNX Supply Voltage | 29 VDC SELV (range: 21-31 VDC) |
| Max. KNX Consumption | 4 mA at 29 VDC (116 mW) |
| Output Configuration | 8 potential-free outputs via bistable relays |
| Max. Load Capacity | 16A C-Load per output, max. 140 µF |
| Total Current | 80 A |
| Protection | No integrated short-circuit or overload protection |
| Mounting | DIN-rail (4.5 units, IEC 60715) |
| Operating Temperature | 0°C to +55°C |
| Protection Rating | IP20 |
| Relay Lifespan | Mechanical: min. 3 million cycles; Electrical: min. 100,000 cycles at 8A |
| Cable Cross-Section | 1.5-4 mm² (IEC), 26-10 AWG (UL) |
| Operation Indicators | Red LED for programming mode, green LED for test mode, and status LEDs per output |
Additional Information
The Zennio MAXinBOX 8 v4 supports multiple phases on adjacent outputs, but SELV and non-SELV power sources cannot be connected in the same block. Its robust design makes it ideal for use in both commercial and residential KNX projects.
Related products
Multifunctional KNX actuator with 8 configurable outputs (16 A C-Load) and 8 analog/digital inputs. Outputs can be used individually as a switch actuator. Suitable for shutters, heating, and KNX Secure.
€304,64 Incl. tax
KNX actuator with 12 configurable outputs (16 A), usable individually as switch actuators. Suitable for shutter control, fan regulation, and KNX Secure.
€342,99 Incl. tax
KNX actuator with 16 configurable outputs (16 A), usable individually or as shutter and fan channels. Supports KNX Secure and logic functions.
€420,41 Incl. tax
KNX actuator with 20 configurable outputs (16 A), usable individually or as shutter and fan channels. Supports KNX Secure and logic functions.
€495,13 Incl. tax
KNX actuator with 24 configurable outputs (16 A), suitable for shutters, fans, lighting, and fan-coil systems. Supports logic functions and DIN rail mounting.
€550,95 Incl. tax
