2 fold Switching actuator 2 x AC 230 V | RS510/23
€65,88 Excl. tax
€122,00 Excl. tax
€79,71 Incl. tax €147,62 Incl. tax. Out of stock, but available
Unit price: €65,88 / Piece
€79,71 Incl. tax €147,62 Incl. tax. Out of stock, but available
Switching actuator with 2 potential-free relay outputs, suitable for resistive, inductive, and capacitive loads. Integrated bus coupling, IP20 protection, and advanced programming features. Read more
Specifications
Brand:
Siemens
Article number:
5WG1510-2AB23
EAN:
4001869436357
Availability:
Out of stock, but available
Delivery time:
Will be shipped within approximately 8 working days.
Information
Siemens Switching Actuator 2-fold, 230 V, 10 A, Art. No. RS510/23
The Siemens RS510/23 switching actuator is a KNX component with 2 potential-free relay outputs. This device is ideal for versatile applications in KNX installations, including switching resistive, inductive, and capacitive loads. The integrated bus coupling and extensive programming options via ETS make it a perfect choice for building automation.
Main Features
- Outputs: 2 potential-free relay outputs
- Nominal voltage: AC 230 V, 50/60 Hz
- Max. current: 10 A per output (resistive load)
- Suitable loads:
- Resistive loads (e.g., electric heating)
- Inductive loads (e.g., motors, transformers)
- Capacitive loads (e.g., electronic transformers)
- IP protection class: IP20
- Bus connection: Integrated with screwless terminals
- Switching capacity:
- Incandescent lamps: max. 1000 W
- Fluorescent lamps (uncompensated): max. 500 W
- Fluorescent lamps (parallel compensated): max. 2 x 58 W
- Electronic ballasts: max. 10 units (58 W)
Technical Specifications
- Power supply: Via bus line (24 V DC) and mains power (230 V AC)
- Installation: Suitable for mounting in AP 118 or AP 641 boxes
- Operating temperature: -5 °C to +45 °C
- Dimensions (L x W x H): 78 x 50 x 38 mm
- Weight: Approximately 45 g
- Thermal dissipation: Max. 3.14 W at full load
- Bus current consumption: < 10 mA
Advanced Features
- Selectable relay modes: NO/NC contact
- Logical operations: AND/OR combinations
- Configurable On and Off delay times
- Scene control: Up to 8 scenes integrated
- Night mode: Time-limited switching with warning signal
- Counters for operating hours and switching cycles with threshold monitoring
- Manual operation and forced control possible
Safety and Reliability
- Protection class: III according to IEC 60664-1
- Overvoltage protection: SELV DC 24 V
- EMC compliance: Meets EN 50428
- Environmental conditions:
- Relative humidity: 5% to 93% (non-condensing)
- Storage temperature: -25 °C to +70 °C
Note: The required AP 118 or AP 641 mounting boxes must be ordered separately.