Decentralized power supply, 80 mA, AC 230 V - RL 125/23
€69,91 Incl. tax €129,47 Incl. tax. Out of stock, but available
Specifications
Information
Decentralized KNX Power Supply RL 125/23 – 80 mA
The RL 125/23 is a decentralized power supply for KNX systems, providing 80 mA output current. Designed for installation in:
- AP 118 Control Module Box
- AP 641 Room Control Box
- M 590 DIN rail housing
Main Features
- Primary voltage: AC 120-230 V, DC 220 V
- Secondary voltage: DC 29 V (SELV)
- Secondary current: 80 mA
- Integrated choke: Prevents data telegram short circuits.
- Supports up to 8 units in parallel per line.
Installation Instructions
The RL 125/23 connects via a bus terminal. When multiple units operate in parallel, adjust the configuration to eliminate overload indicators.
Note: The maximum cable length ranges from 350 m to 1000 m depending on the number of power supplies in use.
Safety
The power supply provides voltage and current regulation, is short-circuit proof, and bridges short power outages (≥100 ms).
To ensure uninterrupted power, use a separate circuit with safety isolation for the mains supply.
Related products
KNX switching actuator with 1 output, suitable for C-loads. Max. switching current 16A, power 3680W. Supports various load types. Compact installation with IP20 rating.
€68,61 Incl. tax
The Siemens AP 641/01 Room Control Box offers 8 module slots, internal bus cables, an IP54 enclosure, and various installation options for ceilings, walls, or floors.
€133,39 Incl. tax
KNX actuator for 230V motors with electromechanical limit switches. Suitable for blinds, shutters, and windows. Includes automatic travel time calibration. Suitable for mounting in AP 118 or AP 641 housings.
€77,75 Incl. tax
KNX binary input with 4 channels for AC/DC 12...230 V. Supports switching, dimming, pulse counting, and scene control. Suitable for AP 118 and AP 641 housings.
€118,27 Incl. tax
Switching actuator with 2 potential-free relay outputs, suitable for resistive, inductive, and capacitive loads. Integrated bus coupling, IP20 protection, and advanced programming features.
€79,71 Incl. tax
Switch module with 3 outputs (6 A, AC 230 V) for independent control of lighting or other loads. Offers time control, manual override, logic functions, and night mode. For installation in AP 118 or AP 641 housing.
€90,82 Incl. tax
KNX shutter actuator with 2 channels for AC 230 V, 6 A. Supports automatic end positions, travel time detection, sunshade control, scenes, and wind/rain protection. Bus-powered, ETS3 compatible.
€113,04 Incl. tax
Universal dimmer with 1 output for 230 V AC, suitable for resistive, inductive, and capacitive loads. Features overload, short circuit, and overheat protection.
€115,65 Incl. tax
