Switching actuator 1-fold, 16 AX, C load | RL 512/23
€68,61 Incl. tax €127,05 Incl. tax. Out of stock, but available
Specifications
Information
KNX Switching Actuator | 1-fold | Suitable for C-loads
The SIEMENS KNX Switching Actuator RL512/23 provides a reliable solution for switching various load types, including C-loads. Compact and efficient, it is ideal for building automation systems.
Technical Specifications
- Outputs: 1 potential-free relay, max. 16A
- Nominal voltage: 230V AC, 50/60 Hz
- Switching power: Max. 3680W
- Suitable for:
- Incandescent lamps: Max. 3680W
- LV halogen lamps with inductive transformer: 2000W
- LV halogen lamps with electronic transformer: 2500W
- Fluorescent lamps (uncompensated): 3680W
- Fluorescent lamps (parallel compensated): 2500W
- KNX bus voltage: DC 21...30V
- Bus current consumption: < 10mA
- Mechanical lifetime: > 1,000,000 cycles
- Electrical lifetime: > 100,000 cycles at AC1, > 30,000 cycles at AC3
- Protection rating: IP20
- Installation: For mounting in AP118 Control Module Box or AP641 Room Control Box
- Dimensions: 86.5 x 47.8 x 36.2 mm
- Maximum relay positions per minute: 60
Key Features
- Scene control: Supports up to 8 scenes
- Timer function: Time-based switching with night mode
- Status storage during bus voltage drop and recovery
- Building site function: Operates without ETS configuration
- Factory reset via programming button (press >20 seconds)
Important Note
Configuration and commissioning require ETS3 v3.0f or later. The device supports switching cycle and operating hour monitoring with threshold alerts.
Related products
The Siemens AP 641/01 Room Control Box offers 8 module slots, internal bus cables, an IP54 enclosure, and various installation options for ceilings, walls, or floors.
€133,39 Incl. tax
Decentralized KNX power supply, 80 mA. Suitable for AP 118, AP 641, or DIN rail. Integrated choke. Parallel operation supported.
€69,91 Incl. tax
- 1 channel
- Modular installation device for mounting in AP 118 automation module box or AP 641 room control box
€77,75 Incl. tax
4 Inputs for AC/DC 12...230 V
Max. cable length, unshielded, twisted 100 m
Bus-powered electronics
€118,27 Incl. tax
Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)
€79,71 Incl. tax
3 floating relay contact
One relay contact per output as switching element
Contact rated current according to DIN EN 60669-1: 6 A (resistive load)
€90,82 Incl. tax
2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other
€113,04 Incl. tax
