KNX RF (wireless)

Wireless magnetic contact for surface mounting in door or window, which detects and notifies their opening/closing through the KNX RF standard (868 MHz)

Available colours:
Black (Ref. ZRFWDB)
White (Ref. ZRFWDW)
Grey (Ref. ZRFWDG)
Dark brown (Ref.

Wireless KNX-RF multisensor for temperature, brightness, and humidity. Programmable with ETS5, featuring alarms for overheating, sun protection, and humidity. Battery-powered with a lifespan of over 8 years.

The KNX RF+ Socket switches electrical loads via KNX / EIB telegrams. With active power measurement, timing functions, scene control, and status reporting, it offers versatile operation.d.

Wireless sensor for temperature, humidity, and brightness. Easy installation without KNX bus cables. Compatible with ETS5 for advanced configuration. Battery life >8 years.

The KNX RF+ line coupler connects KNX RF+ devices to the KNX bus, reducing load. From ETS6, it can function as a segment coupler. Compact and flush-mounted.

Compact RF/TP coupler connects KNX RF devices to the KNX Bus Twisted Pair. Supports long frames, ETS5-compatible, with filter tables and LED indicators. Powered by KNX bus.

ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes

Wireless door/window contact sensor for detecting open/closed status. Battery-powered (life >12 years). KNX-RF S-Mode, configurable via ETS5.

Wireless KNX-RF motion sensor with PIR technology and daylight sensor. Recessed ceiling mount, battery-powered with >10 years lifespan. 360º detection, Ø7m range at 2.5m height. Programmable via ETS5.

Wireless dimmer for 1-10V ballasts or LED drivers. Compatible with KNX-RF Easy Mode. Perfect for junction box installation. Supports wireless and wired control.

The KNX RF+ Socket switches an electrical load via KNX/EIB telegrams. It supports time functions, logical linking, scenes, and central switching/block functions.

The KNX RF+ 2-fold switch actuator controls up to 2 independent loads via KNX RF+. With 10A power, time functions, and scenes, ideal for modern installations without KNX wiring.

Wireless KNX-RF S-Mode dimmer for RGB LED strips. 3 channels for RGB or single-colored LED strips with PWM control. Configurable via ETS5, with analog and digital inputs.

This KNX RF+ actuator, 1-fold, switches independent loads with ETS5 support. Monostable relays, staircase lighting function, and logical functions without bus cables.

KNX-RF Easy Mode
Universal RF Easy Mode dimmer for wireless or wired control of dimmable LEDs, halogen, and incandescent lamps. Suitable for leading and trailing edge technology, max coverage of 100m.

Wireless KNX-RF interface with 2 channels for switching, dimming, or blinds control. Easy installation without wiring, includes temperature and battery status sensor. Programmable with ETS5 or higher.

KNX RF USB Interface Stick 340 enables bidirectional communication between PC/laptop and KNX RF network. Compatible with ETS 5+, supports KNX Secure programming and cEMI protocol. SDK available.

The MDT KNX RF+ Shutter Actuator receives KNX/EIB telegrams and controls 1 indipendent shutter or sunblind drive.
The output uses two monostable relays.

The KNX RF+ Push-button Plus 4-fold offers extensive functions such as light switching and shutter control. Ideal for existing installations without KNX bus wiring, with integrated actuator and LED indication.

1-channel KNX-RF dimmer for LED, halogen, and incandescent lamps. Supports leading- and trailing-edge dimming. Configurable dim levels, soft on/off, scenes. KNX-RF S-Mode.

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

Dimmer for 12V-48V single-color LED strips with PWM dimming. Control via wireless or wired pushbutton. Max load 8A, RF Easy Mode compatible, KNX-RF supported. Junction box mounting.

The KNX RF+ Push-button Plus 8-fold offers advanced control of lights, shutters, and devices. The buttons are programmable with an integrated actuator and LED indicator. Ideal for wireless solutions.