DIMinBOX DX4 | 4-channel, universal RLC, LED, CFL 300-1200W
€341,97 Incl. tax €438,43 Incl. tax. Out of stock, but available
Specifications
Information
Zennio DIMinBOX DX4 Universal Dimmer (RLC, LED, CFL) Ref.: ZDIDBDX4
The Zennio DIMinBOX DX4 is an advanced universal dimmer designed for DIN-rail installation. With 4 channels, this dimmer supports up to 300 W per channel (up to 1200 W total in quad mode at 230 VAC) and is compatible with a wide range of loads, including RLC, dimmable LED, and CFL lamps. The device offers advanced functionalities such as automatic load detection, configurable dimming curves, and manual control via buttons on the front panel.
Key Features
- 4 channels for RLC loads, dimmable LED, and CFL lamps.
- Maximum power:
- 300 W per channel at 230 VAC (1200 W total in quad mode).
- 200 W per channel at 110 VAC (800 W total in quad mode).
- Automatic detection of load type (RLC).
- Manual control via buttons on the device.
- 10 independent logical functions for flexible applications.
- Protection against short circuits, overvoltage, overheating, and frequency errors.
- Data retention in case of KNX bus failure.
Technical Specifications
| General | Specification |
|---|---|
| Dimensions | 67 x 90 x 140 mm (8 DIN units) |
| Mounting | DIN rail (IEC 60715 TH35) |
| Weight | 361 g |
| Protection Class | IP20 (for clean environments) |
| Operating Temperature | 0 .. +55 °C |
| Storage Temperature | -20 .. +55 °C |
| Operating Humidity | 5 .. 95% |
| Storage Humidity | 5 .. 95% |
| Electrical | Specification |
|---|---|
| KNX Bus Supply | 29 VDC (typical), range: 21-31 VDC |
| External Power Supply | 110-230 VAC, 50/60 Hz |
| Maximum Current Consumption | 13.53 mA @ 29 VDC |
| Fuse Protection | 250 V, 10 A, time-lag (T) |
| Cable Connection | Screw terminals, 1.5-4 mm² |
Compatible Loads
- RLC loads:
- 300 W per channel (1200 W total in quad mode) at 230 VAC.
- 200 W per channel (800 W total in quad mode) at 110 VAC.
- Dimmable LED lamps:
- 300 W per channel (1200 W total in quad mode) at 230 VAC.
- 200 W per channel (800 W total in quad mode) at 110 VAC.
- Dimmable CFL lamps:
- 300 W per channel (1200 W total in quad mode) at 230 VAC.
- 200 W per channel (800 W total in quad mode) at 110 VAC.
Additional Features
- Manual control via buttons on the device.
- Status indication via LEDs:
- Red: programming mode.
- Green: test mode.
- Blinking: error detection.
- Memory function: retains settings during power failure.
Note: Compatible only with dimmable loads. Please refer to the technical documentation for compatibility details and specific configuration instructions.
Related products
Universal DIN-rail dimmer (350 W) with automatic load detection (RLC, LED, CFL). Manual control, fault detection, and adjustable dimming curve included.
€143,77 Incl. tax
Universal DIN-rail dimmer (600 W total, 310 W per channel). 2 channels for RLC, LED, and CFL, with auto-detection, manual control, and logic functions. Includes 2 analog/digital inputs.
€212,58 Incl. tax
Universal KNX dimming actuator for DIN-rail with 2 channels (210 W/230 V per channel). Supports RLC, dimmable LED, and CFL. Auto load detection and configurable dimming curves.
€194,09 Incl. tax
Universal dimming module with 4 channels for RLC, LED, and CFL loads (dimmable). Up to 750 W at 230 VAC. Automatic load detection and manual control.
€309,11 Incl. tax
