KNX-RF push-button | 8-gang

Information

Datasheet

KNX RF+ Push-button Plus 8-fold

The KNX RF+ Push-button Plus 8-fold offers versatile wireless control options for lighting, shutters, and other systems. The device uses the KNX RF+ protocol in system mode and can be fully configured via ETS5 or higher. This makes it ideal for renovations and expansions of existing installations without additional wiring.

Main Features:

• Operates with the KNX RF+ protocol in system mode
• Commissioning via ETS5 or higher
• Suitable for use within the EU (frequency: 868 MHz)
• Compatible with 55 mm systems like GIRA, BERKER, JUNG, and MERTEN
• Programmable buttons for 1- or 2-button operation
• NO or NC contact, adjustable switching time
• Orientation LED and two-colored sensor LED (red/green)
• Integrated actuator for 2-fold switching operation or 1-fold shutter operation
• Connection via MDT KNX RF+ line coupler
• Ideal for replacing conventional push-buttons without KNX wiring
• Power supply: 230 V AC
• Integrated bus coupling unit, installation with included support ring
• Made in Germany, ISO 9001 certified
• 3-year warranty

Technical Data:

• Number of control surfaces: 8
• Frequency: 868.3 MHz
• Transmit power: 10 dBm
• Sensitivity: > -105 dBm
• Compatible with KNX RF S-mode
• Number of outputs: 2
• Ohmic load: 10 A
• Capacitive load: 14 µF
• Maximum inrush current: 80 A/150 µs, 40 A/600 µs
• Maximum load for incandescent lamps: 1900W
• Maximum load for halogen lamps (230 V): 800W
• Maximum load for electronic transformers: 500W
• Maximum load for fluorescent lamps: 500W
• Power consumption: < 0.3 W
• Operating temperature range: 0 to +45°C
• Protection class: IP 20
• Dimensions (W x H): 55 mm x 55 mm

Available article numbers and descriptions in this series:

• RF-TA55A2.01 KNX RF+ Push-button 2-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A206.01 KNX RF+ Push-button Plus 2-fold flush-mounted with actuator, black matt, status and orientation LED
• RF-TA55A4.01 KNX RF+ Push-button 4-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A406.01 KNX RF+ Push-button Plus 4-fold flush-mounted with actuator, black matt, status and orientation LED
• RF-TA55A6.01 KNX RF+ Push-button 6-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A606.01 KNX RF+ Push-button Plus 6-fold flush-mounted with actuator, black matt, status and orientation LED
• RF-TA55A8.01 KNX RF+ Push-button 8-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A806.01 KNX RF+ Push-button Plus 8-fold flush-mounted with actuator, black matt, status and orientation LED

Note: The KNX RF+ Push-button Plus 8-fold is ideal for renovations and expansions of existing installations without additional wiring. Configuration can be easily done via the ETS software. A KNX RF+ line coupler is required for proper operation.