KNX-RF push-button | 6-gang

Information

Datasheet

KNX RF+ Push-button Plus 6-fold

The KNX RF+ Push-button Plus 6-fold offers versatile control options for lighting, shutters, and other systems. The device uses the KNX RF+ protocol in system mode and can be fully configured via ETS5 or higher. It is ideal for renovations and upgrades of existing installations without additional KNX bus wiring, as it operates wirelessly via KNX RF+.

Main Features:

• Operates using the KNX RF+ protocol in system mode
• Commissioning via ETS5 or higher
• Suitable for use within the EU (frequency: 868 MHz)
• Compatible with 55 mm systems such as GIRA, BERKER, JUNG, and MERTEN
• Programmable buttons for 1- or 2-button operation
• NO or NC contact, adjustable switching time
• Orientation LED and two-colored sensor LED (red/green)
• Integrated actuator for 2-fold switching operation or 1-fold shutter operation
• Connection via MDT KNX RF+ line coupler
• Ideal for replacing conventional push-buttons without KNX wiring
• Power supply: 230 V AC
• Integrated bus coupling unit, installation with included support ring
• Made in Germany, ISO 9001 certified
• 3-year warranty

Technical Data:

• Number of control surfaces: 6
• Frequency: 868.3 MHz
• Transmit power: 10 dBm
• Sensitivity: > -105 dBm
• Compatible with KNX RF S-mode (supports ETS5)
• Number of outputs: 2
• Ohmic load: 10 A
• Capacitive load: 14 µF
• Maximum inrush current: 80 A/150 µs, 40 A/600 µs
• Maximum load for incandescent lamps: 1900W
• Maximum load for halogen lamps (230V): 800W
• Maximum load for electronic transformers: 500W
• Maximum load for fluorescent lamps (uncompensated): 500W
• Maximum load for parallel compensated fluorescent lamps: 90W
• Maximum number of electronic transformers: 2
• Power consumption: < 0.3 W
• Operating temperature range: 0°C to +45°C
• Protection class: IP 20
• Dimensions (W x H): 55 mm x 55 mm
• Permissible wire gauge: 1.5 mm²

Available article numbers and descriptions in this series:

• RF-TA55A2.01 KNX RF+ Push-button 2-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A206.01 KNX RF+ Push-button Plus 2-fold flush-mounted with actuator, black matt, status and orientation LED
• RF-TA55A4.01 KNX RF+ Push-button 4-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A406.01 KNX RF+ Push-button Plus 4-fold flush-mounted with actuator, black matt, status and orientation LED
• RF-TA55A6.01 KNX RF+ Push-button 6-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A606.01 KNX RF+ Push-button Plus 6-fold flush-mounted with actuator, black matt, status and orientation LED
• RF-TA55A8.01 KNX RF+ Push-button 8-fold flush-mounted with actuator, white matt, status and orientation LED
• RF-TA55A806.01 KNX RF+ Push-button Plus 8-fold flush-mounted with actuator, black matt, status and orientation LED

Note: The KNX RF+ Push-button Plus 6-fold is ideal for renovations and upgrades of existing installations without additional wiring. Configuration is easily done via the ETS software. A KNX RF+ line coupler is required for proper operation.