Siemens

Choke for KNX power supplies without integrated choke or for connection to the unchoked output of N 125/x2 power supplies. Suitable for TH35 EN 60715 rails.

KNX switching actuator with 1 output, suitable for C-loads. Max. switching current 16A, power 3680W. Supports various load types. Compact installation with IP20 rating.

Switch actuator for KNX systems with 12 outputs, suitable for various loads (ohmic, inductive, capacitive). Max. 16/20 A per output, includes current detection and manual operation.

USB interface for isolated KNX bus access. Compatible with USB 2.0 and 3.0, supports bus telegrams up to 64 bytes, powered via USB. Ideal for addressing, parameterization, and diagnostics.

Switching module with 1 channel (16 A, AC 230 V), 3 binary inputs, advanced switching and logic options, flush-mounted. Supports KNX Data Secure.

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

For fixing the presence detectors UP 258D12 and UP 258E22 and the brightness sensor UP 255D21 as a surface mounting device

Ultrasound for reliable detection for ceiling installation indoors even behind objects
Additional detection options through PIR technology
Horizontal 360° motion detection area

Combined switching actuator with 8 outputs (AC 230 V, 16 A) and 8 binary inputs (AC/DC 12-230 V). Direct or bus-controlled, with extensive configuration options.

KNX line coupler for reliable data exchange between bus lines. Supports 64-byte telegrams, has filter table, diagnostic LEDs, and galvanic isolation between lines. For DIN rail mounting.

With 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2 mA)
With integrated bus coupling unit, bus connection via bus terminal
8-wire plug-in cable set, 280 mm long, extendable to a max. of 10 m

KNX actuator for 230V motors with electromechanical limit switches. Suitable for blinds, shutters, and windows. Includes automatic travel time calibration. Suitable for mounting in AP 118 or AP 641 housings.

UP 287/13
Pushbutton, 4 fold with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)

Rated contact current 10 AX

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

KNX binary input with 4 channels for AC/DC 12...230 V. Supports switching, dimming, pulse counting, and scene control. Suitable for AP 118 and AP 641 housings.

The Siemens AP 641/01 Room Control Box offers 8 module slots, internal bus cables, an IP54 enclosure, and various installation options for ceilings, walls, or floors.

• 2 DALI outputs with DALI-2 certification
• Control capacity for up to 20 DALI-ECGs per DALI output
• DALI output voltage of 19 V, short circuit resistant

Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Four-channel KNX switching actuator, suitable for capacitive, inductive, and resistive loads. Supports logic operations, manual control, and time programs.

Universal dimmer with 1 output for 230 V AC, suitable for resistive, inductive, and capacitive loads. Features overload, short circuit, and overheat protection.

2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other